7 Tips for Perfect Flakey Pie Crust and recipe for No-Fail Pie Crust (2024)

It's pie season and here is the perfect recipe, and all the tips and tricks you need to know to create the best pie crust for all your pie needs!

If you're intimidated by pie doughs and struggling to make pies, I've listed for you the 7 best tips and tricks for a perfect flakey pie crust every time, with a bonus tip and recipe at the bottom!

JUMP TO TIPSJUMP TO RECIPE

7 Tips for Perfect Flakey Pie Crust and recipe for No-Fail Pie Crust (1)

I can't deny that I've had a lot of trouble with pie doughs in the past. I've had ones that are too soft, or ones that were too hard from overworking.

I've had ones that are too crumbly and fell apart as soon as you cut into them, not making for a clean removal from the dish, and ones that were undercooked and soggy even. I've experimented and tested a few from trusted sources, made my own tweaks here and there until finally, after much trial and error, I've made my favourite dough for all my pies - my No-Fail Pie Crust recipe which you'll find below.

But before making the dough, you'll need some helpful tips so you can no longer feel intimidated by making pies, and you can have a successful outcome every time. It's fool proof , and delicious!

7 Tips and Tricks for a perfect pie crust:

1. Flour - fat - water ratio.

Although most pie doughs only use 4 main ingredients which are flour, fat, water and salt, you'll need a good ratio of the ingredients to be able to make a good one. In most cases, its 3 parts flour, 2 parts fat, 1 part water. Though you'll need to be careful with adding the water, and start with less, then add more if your dough is too dry. Add just enough so its malleable, but not wet.

2. Pick your fats.

I've learned a lot about the different fats for pie doughs and how best to work with each kind. Almost all recipes use butter, with good reason - it has the most flavour. Other recipes use a combination of butter and lard or shortening.

Though it doesn't have as much flavour as butter, lard can be used because it chills nicely, is easy to work with, and it doesn't break down as fast as the butter when baked.

The butter and lard combination has enough moisture that when baked, evaporates, then leaves pockets of air which then gives you those flakey layers, yet not making it too crumbly.

Shortening can also be used, which is usually the choice fat when making pie crust. It's easy to work with, and works similarly to lard, though it has little to no flavour. All of these are great choices to work with.

3. Keep ingredients COLD.

Regardless of what kind of fat you use, the main trick is that your ingredients need to be COLD. This ensures that when rolled out, you still have those pockets of fat that evaporate when baked and creates layers.

7 Tips for Perfect Flakey Pie Crust and recipe for No-Fail Pie Crust (3)

4. Do NOT use your hands.

In keeping with tip #3, use a food processor or pastry cutter to incorporate the fat. The warmth from your hands can melt the fats into the dough. When incorporating the fat, you want a crumbly texture, but not too fine that its mealy, and you'll want some slightly larger pieces (about the size of a pea) as well. These pieces when baked, melt and their moisture evaporates which makes those flakey layers.

5. Add some vinegar or vodka!

An unusual ingredient, but essential. Both the vinegar and vodka have elements in them that adds moisture, without the addition of water (water encourages gluten development through binding the proteins in the flour, and you don't want that!).

Vodka evaporates, while vinegar is distilled and doesn't encourage gluten development. Either one of them helps with tenderizing the dough, making it much easier to work with. When baked, they lead to a flakier (and tastier) crust.

Use them interchangeably, and no, you will not taste it.

7 Tips for Perfect Flakey Pie Crust and recipe for No-Fail Pie Crust (4)

6. Don't overwork your dough.

Combine the dough just enough until it comes together, is malleable, but doesn't fall apart. The more you work it encourages the gluten development and will result in a tough dough. You will be breaking down the fats further thus not getting the flakey layers. So work quickly and don't overwork it!

7. Egg wash the bottom!

What?! Yep. This may be one of the more important tips I can ever give you. Once you've placed your rolled out dough into your dish, egg wash the bottom and sides then refrigerate while you prepare your filling. Not only does the dough chill once more, but the egg wash dries and forms a barrier from your filling. This helps so the juices don't seep into the bottom crust, and you'll never have a soggy bottom crust ever again! Instructions for blind baking can also be found in the recipe.

7 Tips for Perfect Flakey Pie Crust and recipe for No-Fail Pie Crust (5)

Pie crust with egg wash

Bonus: Sweet or savoury?

Most pie doughs use only 4 main ingredients, but if you want, you can add flavour to your pie crust as well. I've added 1 tablespoon of sugar to add a bit of sweetness, but you can omit the sugar or use a combination of herbs and spices to make a savoury pie dough! Sometimes I like to add a teaspoon of garlic powder to my dough when I want to make a savoury quiche or meat pie.

All in all, my recipe below is quite easy to make, and with the tips and learnings I've listed above, I'm sure you'll be able to get that flakey pastry that will be perfect for whatever flavour pie you'll be making!

7 Tips for Perfect Flakey Pie Crust and recipe for No-Fail Pie Crust (6)
7 Tips for Perfect Flakey Pie Crust and recipe for No-Fail Pie Crust (2024)

FAQs

What are the six ways to ensure a tender flaky pie crust? ›

7 pie crust tips for tender, flaky results every time
  1. 1Keep the dough ingredients cool.
  2. 2Use a light touch.
  3. 3Hydrate the dough (but not too much)
  4. 4Chill the dough.
  5. 5Keep the dough from sticking.
  6. 6Roll the dough out evenly.
  7. 7Relax.
Nov 4, 2022

How do you keep the bottom of a pie crust flaky? ›

Sprinkle dried breadcrumbs or crushed cornflakes, or other types of cereal, on the bottom crust before filling and baking in the oven.

What is the number 2 most important thing when making pie crust? ›

#2—Add cold water

Like the fat, the water should be ice cold. Before you start making the dough, fill a glass with ice and water. Add the ice water gradually to the dough, about one tablespoon or so at a time, and stop when the dough is just moist enough to hold together when a handful is squeezed.

What is one thing you should not do when making pie crust? ›

The Most Common Pie Crust Mistakes (And Ways To Avoid Them)
  1. The ingredients are too warm. ...
  2. The pie dough is overworked from excessive mixing or rolling. ...
  3. The pie dough isn't given enough time to relax and chill. ...
  4. The pie dough is shrinking down the sides of the pan.
Oct 18, 2022

How do you attain a tender and flaky crust? ›

Use the Right Ingredients:Flour: Choose a flour with a moderate protein content, like all-purpose flour. This helps create a tender crust. Fat: Use cold, unsalted butter or a mixture of butter and a neutral oil (like vegetable oil). The fat should be cold and cut into small pieces for even distribution.

How long should you chill pie dough before rolling out? ›

Chill in the fridge for 30 minutes, or up to overnight. Tip: Chilling hardens the fat in the dough, which will help the crust maintain its structure as it bakes. And the short rest before rolling relaxes the dough's gluten, helping prevent a tough crust.

Is pie crust better with butter or Crisco? ›

My preferred fat for pie crusts will always be butter. To me, it is all about flavor, and no other fat gives flavor to a crust like butter does. Other fats, even though they have great pros, lack flavor,” De Sa Martins said. “The more flavorful the butter, the more flavor your pie crust will have,” Huntsberger added.

What causes a pie crust to be too flaky? ›

Tough and flaky are two different things. Tough refers to the texture of the crust and flaky refers to the air pockets that form flaky layers in the crust. In both cases, the secret is to avoid overworking the dough.

What is the secret to crispy bottom pie crust? ›

Getting a brown, flaky/crispy bottom crust on your pie is all about quick and effective heat transfer. That's why aluminum or aluminum/steel pans — rather than glass or stoneware — are your best choice for baking pie. Metal, especially aluminum, transfers heat quickly and efficiently from oven to pie crust.

Should I bake the bottom pie crust first? ›

Pre-baking is a must if you're looking for a flaky pie crust. It's especially helpful for recipes with a wet center. Recipes for most tarts, pies, and quiches call for pre-baking to ensure that the final product doesn't end up soggy.

Should you poke holes in bottom of pie crust? ›

With docking, the holes allow steam to escape, so the crust should stay flat against the baking dish when it isn't held down by pie weights or a filling. Otherwise the crust can puff up, not only impacting appearance but also leaving you with less space for whatever filling you have planned.

What is the most important rule in making a pie crust? ›

Keep the Butter Cold

With this goal in mind, the cardinal rule of pie crusts is to keep things as cold as possible.

What is the best flour to use in flaky pie crust? ›

What kind of flour makes the best pie crust? Well, not high-protein bread flour! Use that for your chewy bagels. What you want for pie is flour that yields a tender, flaky crust, which means medium-protein all-purpose flour or low-protein pastry flour.

Should pie dough be cold before baking? ›

Chilling the dough allows time for the gluten strands in the flour to relax, which makes the dough easier to roll out and keeps it from shrinking while baking. Chilling helps moisture work throughout the dough, making it smoother and easier to roll out.

What is a guideline for producing pastry that is tender and flaky? ›

Flakiness is achieved when there are discernable lumps of cold fat remaining in the final dough. In a hot oven, the dough sets quickly around these cold bits of fat. The bits of fat then melt, leaving holes and creating flaky layers.

How does a pie crust get its flaky texture? ›

First, you have to understand what makes a pie crust—or any dough for that matter—flaky. Pieces of fat (like butter) get trapped between layers of starch in a dough, then melt rapidly in the oven heat, creating steam and little pockets of air in the dough where the butter chunks used to be.

What makes the crust of pastry products flaky? ›

Flaky pastry, like the one pictured here, is made by incorporating small chunks of solid butter or fat through flour (either but 'rubbing in' using your fingertips or 'cutting through' using the cutting blade of a food processor) then binding the dough with moisture from other ingredients such as water and/or eggs.

What would cause a pie crust to be flaky and not tender vs tender and not flaky? ›

The large sheets of butter in a flaky crust are meant to push the dough up while baking to create the flaky layers, but that also means it will push out most shaping. If you work the butter in more uniformly, you'll get a tender (but less flaky) crust that holds a better shape.

References

Top Articles
Latest Posts
Article information

Author: Rubie Ullrich

Last Updated:

Views: 5929

Rating: 4.1 / 5 (52 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Rubie Ullrich

Birthday: 1998-02-02

Address: 743 Stoltenberg Center, Genovevaville, NJ 59925-3119

Phone: +2202978377583

Job: Administration Engineer

Hobby: Surfing, Sailing, Listening to music, Web surfing, Kitesurfing, Geocaching, Backpacking

Introduction: My name is Rubie Ullrich, I am a enthusiastic, perfect, tender, vivacious, talented, famous, delightful person who loves writing and wants to share my knowledge and understanding with you.